GL1800Riders Forums banner
Cancel
Create thread New Forums
Add bookmark
Both Kury models 7963 and 4452 can be used on these Mick-O-Peg models. 7963 almost always returns to the top. 4452, which I use, returns about 1/2 t

Both Kury models 7963 and 4452 can be used on these Mick-O-Peg models. 7963 almost always returns to the top. 4452, which I use, returns about 1/2 t

  • 0
  • 0
EF 29 to 30 inch inseam legs behind engine out of heat stream. This is a long stretch. Most riders prefer to keep some bend in their legs. Normally

EF 29 to 30 inch inseam legs behind engine out of heat stream. This is a long stretch. Most riders prefer to keep some bend in their legs. Normally

  • 0
  • 0
EF 29 to 30 inch inseam gives long stretch.

EF 29 to 30 inch inseam gives long stretch.

  • 0
  • 0
EF From the front

EF From the front

  • 0
  • 0
EF-HS used by a rider with a 32" inseam and a stock seat. If he wanted more stretch, he could move the mount lower down on the vertical bar.

EF-HS used by a rider with a 32" inseam and a stock seat. If he wanted more stretch, he could move the mount lower down on the vertical bar.

  • 1
  • 0
EF-HS in the up position.

EF-HS in the up position.

  • 0
  • 0
E.5F-HS doesn't spread the legs out as much as the K models and can allow your feet to go a little lower.

E.5F-HS doesn't spread the legs out as much as the K models and can allow your feet to go a little lower.

  • 0
  • 0
E.5F-HS mounted about 3/4" lower than maximum height for a good stretch.

E.5F-HS mounted about 3/4" lower than maximum height for a good stretch.

  • 0
  • 0
E.5F-HS Nothing will scrape with this model except your OEM pegs and engine guards. It also comes in the E.5F configuration without the heavy spring.

E.5F-HS Nothing will scrape with this model except your OEM pegs and engine guards. It also comes in the E.5F configuration without the heavy spring.

  • 0
  • 0
E.5Q used as a toe rest. Size 14 boots and the riders pegs are moved forward and inch from stock.

E.5Q used as a toe rest. Size 14 boots and the riders pegs are moved forward and inch from stock.

  • 0
  • 0
Feet as far inside as possible. Can you see my boots?

Feet as far inside as possible. Can you see my boots?

  • 0
  • 0
Feet to the outside of the pegs.

Feet to the outside of the pegs.

  • 0
  • 0
Foot is positioned as far in as possible so my legs are spread as little as possible.

Foot is positioned as far in as possible so my legs are spread as little as possible.

  • 0
  • 0
Foot positioned fully on the peg.

Foot positioned fully on the peg.

  • 0
  • 0
Foot on peg.

Foot on peg.

  • 0
  • 0
Leg spread with feet fully on pegs.

Leg spread with feet fully on pegs.

  • 0
  • 0
Bad photography trying to show the position of the pegs when in the up position. Notice the left peg is further to the rear than the right in order t

Bad photography trying to show the position of the pegs when in the up position. Notice the left peg is further to the rear than the right in order t

  • 0
  • 0
Where's the rider?

Where's the rider?

  • 0
  • 0
E.5Q

E.5Q

  • 0
  • 0
E.5Q mounted almost as low as it can safely go. It will come in a heavy spring version as well.

E.5Q mounted almost as low as it can safely go. It will come in a heavy spring version as well.

  • 0
  • 0

Mick-O-Peg model E.5Q [or EQ depending on what is in stock] and model E.5F [or EF depending on what we have available.]
Click to expand...
There are no comments to display.

Album information

Album owner
ddking
Date created
Item count
20
View count
975
Comment count
0
Rating
0 star(s) 0 ratings

Album privacy

ddking

Media items
20
Albums
1
Can view media items
Everyone
Can add media items
Album owner only

Share this album