GL1800Riders Forums banner
  • Hey everyone! Enter your ride HERE to be a part of August's Ride of the Month Challenge!

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Maryland (MD)
    I have been trying to find out why all of a sudden my front brakes are applying pressure inadvertently. I had my vin checked for the brake recall and I was informed that the work was completed for the rear brakes. I will post again after this coming weekend. I have: flushed the system, rebuilt...
  2. GL1800 Tech Board
    Pad swap on a 2010 GL1800 RF was done in less than 10 minutes. No problems. LF pin hanger frozen and stripped. Tried an Easy out but no luck at all. I've seen other posts that recommend everything from PB blaster to getting a new caliper. Is drilling it out an option? I tried using Vice Grips on...
  3. GL1800 Tech Board
    Hi, just a question : is there a sequence to reinstall the switch?
  4. GL1800 Tech Board
    My 07 ABS/NAV wing had a front bearing failure a couple of weeks ago. It happened while I was on the road and a dealer in Wytheville, VA was able to help me out. Since the bearing and seal replacement, there is an intermittent grab / pull on the front brake and is accompanied by a ticking...
  5. General MC Message Board
    Hello, all. I'm thinking of installing a fork brace and firmer fork springs in my new Wing. I'm trying to reduce fork flex at slow speeds, and reduce the sharp jarring I feel from the little bumps. At the same time, I don't feel the ride is any WORSE when the front brakes are ON. So, should I...
1-5 of 5 Results
Top