Thanks for all your responses. I ended up choosing the Elect. Connect. #02211 GL1800 Fused Y Power Cable and #02205 Power Plug. When it comes in will install single lead Y connection to the accessory connector and then plug existing volt meter connector into the 3 amp fused connector with the 12 volt socket plugged into the 5 amp connector. :thumbup:
12 volt DC accessory socket kit
I would like to install on my 1800 for charging cell and using GPS. As I understand from Hal's site, this accessory is placed within the front side pocket - either left or right. Supposed to be plug and play. Since I have Ram mount for left side - thinking about putting in left pocket. I also have the volt meter installed which is plugged into the accessory plug underneath the left front pocket.(on pre-2006 this accessory plug was under right side) Wondered if there is another available plug for connecting under left front pocket or would I need to obtain another wiring harness which would enable me to plug both the volt meter and accessory socket in this single connector.
Since I haven't seen one installed, wonder - do you just lay in bottom of glove box or is the plug actually mounted to the inside of the box? Any info or guidance would be appreciated.
Since I haven't seen one installed, wonder - do you just lay in bottom of glove box or is the plug actually mounted to the inside of the box? Any info or guidance would be appreciated.
1 - 2 of 11 Posts
1 - 2 of 11 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
GL1800Riders Forums
A forum community dedicated to Honda Goldwing owners and enthusiasts. Come join the discussion about performance, modifications, touring, troubleshooting, maintenance, and more!
Full Forum Listing
Top Contributors this Month
View All
clayusmc
661 Replies
VoicesInMyHead
411 Replies
ssncob
396 Replies
