GL1800Riders Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2,081 Posts
Discussion Starter #1
Anyone know what offset the rear wheel is ?
 

·
Registered
Joined
·
170 Posts
here are the measurements I took from a spare rear wheel for a 5th gen 1800(not sure of exact year)
wheel mount flange to rim back side of wheel- 40.9mm/1.610in
wheel mount flange to rim outside of wheel- 106.3mm/4.185in
 

·
Registered
Joined
·
2,081 Posts
Discussion Starter #3
here are the measurements I took from a spare rear wheel for a 5th gen 1800(not sure of exact year)
wheel mount flange to rim back side of wheel- 40.9mm/1.610in
wheel mount flange to rim outside of wheel- 106.3mm/4.185in
I assume back side is right side ?
That would be a 65.4mm neg backset.
 

·
Registered
Joined
·
170 Posts
Yes, back side is against the final drive/disc . This was measured from the mounting surface to each side with a straight edge across the wheel .
 
1 - 4 of 4 Posts
Top