GL1800Riders Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter #1
Thanks Electrical Connection, I was able to turn the outer trunk lights of my 2008 GL1800 to signal lights. I cannot find a kit to reconfigure the trunk lights of my 2015 GL1800 to signals. Has anyone done such a mod that can shed some (blinking) light on this? Thanks!
 

·
Registered
Joined
·
1,448 Posts
Should be able to do it similar to converting the ones in the trunk from tail lights only to tail and brake lights.
EC sells a kit to do that, only problem would be the wire will not be long enough to reach to a turn signal circuit, you would either have to add more wire to the EC jumper or buy the sockets and make your own long jumper.

Here is the EC standard jumper for lighting up the second filament in the bulbs. https://electricalconnection.com/index.php/product/honda-gl1800-trunk-light-jumper-wires/

I am not sure what the easiest route would be to get to the turn signal circuits, I make a break out jumper that goes in under the seat and breaks out the C31 connector so you can tap into the brake light, tail light, left turn and right turn, if you had one of them it would be easy to get from the trunk to under the seat I would think. See my post in the inventors hobby shop, https://gl1800riders.com/forums/201-inventors-hobby-shop/431273-c31-breakout-harness.html
 
1 - 2 of 2 Posts
Top