Joined
·
4 Posts
Brake Bleeding on 2018 Honda Gold Wing DCT: For referencing convenience per the website, for Honda Gold Wing 2018-2020, the part number is SB8125L (standard length) or SB8125LL (longer length) . Each of these is also made in stainless steel, and carries an "-SS" suffix on the part number.
A total of 5 bleeders are needed (for DCT). Two each for front brakes, two each for rear brakes (located on near front brake bleeders on front wheel), and 1 each for the rear brake lower. The rear brake lower is located near the muffler cowling. Use the short bleeder style, as using the longer bleeder here may prove difficult to install/access conveniently.
Here's the application chart on the website:
A total of 5 bleeders are needed (for DCT). Two each for front brakes, two each for rear brakes (located on near front brake bleeders on front wheel), and 1 each for the rear brake lower. The rear brake lower is located near the muffler cowling. Use the short bleeder style, as using the longer bleeder here may prove difficult to install/access conveniently.
Here's the application chart on the website:
