GL1800Riders Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
794 Posts
The Kuryakyn Highway pegs I installed are much cheaper. However, they are not plug & play. There is quite a lot of cutting & fitting to make them work. They do work quite well for me, so I'm satisfied for now. :serious: :surprise:
 

·
Registered
Joined
·
1,677 Posts
do a search here. Lots of discussion and examples.
 
  • Like
Reactions: remoandiris

·
Registered
Joined
·
8,747 Posts
After putting pegs on mine, I hardly ever use them.
The ergonomics are so much better than the old wings.
YMMV :smile2:
 

·
Registered
Joined
·
8,747 Posts
Does anyone know of a cheaper pair of riding pegs that work for a 2018 goldwing tour

I used some Kury pegs that people were having fits over saying they would scrape at every turn. They clamp to the engine guards next to the down tubes of the exhaust. No mods to the bike as well.
Well in my case they work well and I don't ride aggressive enough to scrape them. When I do seldom use them, its on the freeway and they work as intended.:smile2:
This is what I used. Please no naysayers, been there done that. Just answering the OP's question.:nojoke:
Kuryakyn Long Right Angle Mounts & Small ISO Pegs with 1in. Clamps 4507
https://www.kuryakyn.com/products/969/right-angle-cruise-mounts-pegs
 

Attachments

1 - 6 of 6 Posts
Top