GL1800Riders Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
755 Posts
Better make sure that the one above will handle a mic. It says for listening. Anyway, if you are handy with a small soldering iron and have the wiring diagram, you can likely build one for less than $10.

Just a thought... :idea:
 

·
Registered
Joined
·
567 Posts
if the mic is not a dynamic type, an adapter will not do any good. if it is an electret type element, you will need to include a voltage bias source and signal divider in the adapter configuration.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top