GL1800Riders Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
259 Posts
Discussion Starter #1 (Edited)
I have an LED strip I plan to add to the front signal lights and rather than just tap into the stock harness I found the Kuryakyn adapter #7300 says for adding front turn signal accents. Looking at the picture it appears to be just a connector.
I was after a Y for additional lights?
When I did this on my F6B # 7301 was a Y connector for just this application.

I feel foolish, what I am missing....
 

·
Registered
Joined
·
1,367 Posts
Have you looked at Kuryakyn #7301? It is a “Y” connector.
Depending on the type of connector on your LED strip, this may be what you need.
 
1 - 2 of 2 Posts
Top