[Russell1234]

I have a show chrome fuse block. The problem is that it only has 1 left turn plug and 1 right turn plug in. I’ve run out of places to plug into
And the holes are to small to keep twisting wires together.
Any recommendations for one that has more plug in options that will still fit under the seat?
Thanks
Russ

 

[Stone Laker]

On your Show Chrome fuse block install a 6" long 16 AWG wire in each terminal. Then install t-taps on that wire. Use spade connectors and connect your wires to the t-taps. Just make sure you cap off the end of your 6" wires.

 

[305wingHD]

lewis preston from electrical connections sells one that he installed on my bike that has multiple inputs and works great its compact enough that it fits under the seat with no issues https://electricalconnection.com/index.php/product/lighting-distribution-block/

the subharness makes it so that its all plug and play into the wiring harness of the bike.
https://electricalconnection.com/index.php/product/isolator-honda-goldwing-tour-2018/

 

[Gene Young]

On your Show Chrome fuse block install a 6" long 16 AWG wire in each terminal. Then install t-taps on that wire. Use spade connectors and connect your wires to the t-taps. Just make sure you cap off the end of your 6" wires.

I was gonna suggest something like that. Connect your multiple wires together external to the power block and then run one wire to the block, kind of like you would ground wires in a wall switch.

 

[Ruben77]

I have used the Wago 221-413 connectors to connect multiple cables to one port