GL1800Riders Forums banner
1 - 1 of 11 Posts

· Registered
24,622 Posts
Just put the entire affair inside of a section of 3 or 4 inch PVC pipe. Drill and thread holes in a cap, and a fill plug. This would be easy to mount with regular old pipe clamps, and would contain the caustic chemical in case it leaks, and you can insulate the pipe with standard pipe insulation. It will withstand much more than 120 degrees.

1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.