GL1800Riders Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
89 Posts
Discussion Starter #1
I have seen the aluminum spacer offered on e-bay to disable the anti dive unit on the gl1800. I own a cnc machine shop and will build one for myself, my question is how thick would the spacer need to be?? Your reply will be greatly appreciated.
 

·
Premium Member
Joined
·
12,497 Posts
a drilled out "nickel" works
..so, about that thick.

Dennis
 

·
Registered
Joined
·
5,923 Posts
a drilled out "nickel" works
..so, about that thick.

Dennis
:thumbup:

7/32 drill bit and drill dead center. Works like a champ.
 

·
Registered
Joined
·
1,353 Posts
I've bought a few and I believe they are 1/8" thick. You will also need longer screws.

Wayne
 
S

·
Guest
Joined
·
0 Posts
:thumbup::thumbup:

Not only is the eBay deal is a rip the guy claims it prevents oil seal damage. Obviously the seller does not know how the valve works or he would know better.

The nickle deal works every time and hey - it only costs a nickle ;)
 
1 - 7 of 7 Posts
Top