GL1800Riders Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter #1
has anyone had to buy a new license plate light for 06,did not see a part number my book on the trike and have not got a reply from the factory.thanks for any help!
 

·
Registered
Joined
·
58 Posts
My 08 CSC has LEDs for the licence plate. Interesting thing was...it came mis-wired. Two of the wires going to the molex disconnect connector were reversed. Being a retired electronicer, I caught it and reversed them back. Works great now. Make sure your's aren't LEDs. I doubted very much that the LEDs had burned out. And...it saved me getting another plate ring.
 

·
Registered
Joined
·
362 Posts
license plate light

The light on mychampion is a chryler product part It appears to say SAE L81 PD. Go to a Dodge or chryler dealer for it. Good luck..
 

·
Registered
Joined
·
3,767 Posts
My 06 Champion still has the factory bulb in it.
Interested as to what you find for a part number.
 

·
Registered
Joined
·
1,638 Posts
I replaced mine with a motortrike license plate light. Simple modification. Got this for $6.00 as it was used, but fully functional and the holes lined up for my Champion kit.

I added a photo to this for clarification. HTH
 

Attachments

1 - 6 of 6 Posts
Top