GL1800Riders Forums banner
  • Hey everyone! Enter your ride HERE to be a part of September's Ride of the Month Challenge!
1 - 3 of 3 Posts

·
Registered
Joined
·
266 Posts
Discussion Starter · #1 ·
OK,so I changed out all my brake fluid a month or so ago on my '04 titanium Wing.........was successful with the brakes(switched to Valvoline synthetic type DOT 4 fluid)and eliminated sponginess from the brakes,plus clean fluid in the system too.............only trouble is,I wanted to do the clutch as well but Honda,in their infinite wisdom( :shock: ),has obviously seen fit to hide the bleeder quite well.I siphoned all the old fluid from the clutch master but would like to get some clean stuff all the way down.Looks like the line disappears somewhere behind the engine from my vantage point.
-Where the f__ is it??? :evil: Just need to know if it involves pulling bodywork and how much,if so,it can wait till I get time to do an air filter change.Thanx!
 

·
Registered
Joined
·
266 Posts
Discussion Starter · #3 ·
Thanx!
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top