GL1800Riders Forums banner
1 - 5 of 5 Posts

· Registered
Joined
·
22 Posts
Discussion Starter · #1 ·
Hi Guy's
I remember reading on this board somewhere, sometime about how to adjust the cruise controll engagement, but I'm unable to locate it now. Could someone repost it?
I have an 08 Pearl White.

Thanks
 

· Registered
Joined
·
17,884 Posts
Hi Guy's
I remember reading on this board somewhere, sometime about how to adjust the cruise controll engagement, but I'm unable to locate it now. Could someone repost it?
I have an 08 Pearl White.

Thanks
Aye, The search feature is your friend. The basics: Quick method. Remove instrument panel. Locate cruise turnbukle. Tie nice long piece of string onto your wrenches that fit the turn buckle. Loosen turn buckle lock nut. Turn barrell of turnbuckle three complete revolutions to make the over all length of the buckle longer. Test cruise, if too tight to suite, back off in 1/6 turns until happy. If still too loose (lags) increase by 2/6 turns until happy. Snug the lock nut and install instrument panel.

Honda method. You need the book.

prs
 

· Registered
Joined
·
27 Posts
Quick method number 2.
Remove the top cover to show the cruise adjuster.
Loosen the lock nut. Start the bike.
Wind the long adjuster out until the idle speed goes up.
Wind it back in 1/2 to 3/4 of a turn.
Do up the lock nut.
Replace the top cover.
Go ride.


Ben.
 

· Registered
Joined
·
22 Posts
Discussion Starter · #4 ·
Thanks.

I tried search, but I guess I wasn't smart enough to type the right question.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top