GL1800Riders Forums banner

1 - 20 of 20 Posts

·
Registered
Joined
·
7,599 Posts
If you say so! ;) Welcome to the forum.
 

·
Registered
Joined
·
831 Posts
Simply remove all the gold bars from the right saddle bag and she'll level right up! Oh yeah, welcome. (y)
 

·
Registered
Joined
·
80 Posts
Czech for "I am have a problem with my trike, wrong"

I agree.

Sent from my SM-N960U using Tapatalk
 

·
Registered
Joined
·
7,599 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #9
[QUOTE = "beckhardt, příspěvek: 5719435, člen: 17791"]
Jednoduše odstraňte všechny zlaté pruty z pravého sedlového pytle a ona se vyrovná hned! Ach jo, vítejte.(y)
[/CITÁT]
tažky jsou prazdné volné tahlo již OK
 

·
Registered
Joined
·
8,965 Posts
[QUOTE = "beckhardt, příspěvek: 5719435, člen: 17791"]
Jednoduše odstraňte všechny zlaté pruty z pravého sedlového pytle a ona se vyrovná hned! Ach jo, vítejte.(y)
[/CITÁT]
tažky jsou prazdné volné tahlo již OK
Musíte zavolat výrobci a získat od nich pomoc. Hodně štěstí s hledáním řešení.
 

·
Registered
Joined
·
8,965 Posts
@Honza

Omlouvám se, protože někteří se zajímají o vaše tašky, které máte na blatnících.

Nevím o částech zavěšení na vašem vozidle, ale doufám, že bude k dispozici další majitel stejného modelu.

Opět hodně štěstí.


My apologies, as some are interested in your bags that you have on the fenders.

I do not know about the suspension parts on your vehicle, but hope that another owner of the same model will be around to assist.

Again, good luck.
 

·
Registered
Joined
·
4,823 Posts
This is just an idea.
The attached picture is from my CSC Cobra Trike conversion. I have a 2005 wing,
The trike rear suspension is bolted to the original aluminum frame on each side.
Those big bags look to me like they could be loaded too heavy and too wide, putting a lot of lateral strain on the trike mounting points (which were never designed for such loads). It could be that the frame broke on the right side. You can see the mounting points in the picture.
Could it be that the frame broke up by the passenger floor board (where it was common for them to break) or that the mounting points failed one-at-a-time until all were broken?
 

Attachments

·
Registered
Joined
·
5 Posts
Discussion Starter #18
[QUOTE = "beckhardt, příspěvek: 5719435, člen: 17791"]
Jednoduše odstraňte všechny zlaté pruty z pravého sedlového pytle a ona se vyrovná hned! Ach jo, vítejte.(y)
[/CITÁT]
Páky jsou prázdné povolené prut již v pořádku
 

·
Registered
Joined
·
5 Posts
Discussion Starter #19
Páky jsou prázdné povolené prut již v pořádku
Simply remove all the gold bars from the right saddle bag and she'll level right up! Oh yeah, welcome. (y)
The levers are empty permitted rod already ok
 

·
Registered
Joined
·
5 Posts
Discussion Starter #20
This is just an idea.
The attached picture is from my CSC Cobra Trike conversion. I have a 2005 wing,
The trike rear suspension is bolted to the original aluminum frame on each side.
Those big bags look to me like they could be loaded too heavy and too wide, putting a lot of lateral strain on the trike mounting points (which were never designed for such loads). It could be that the frame broke on the right side. You can see the mounting points in the picture.
Could it be that the frame broke up by the passenger floor board (where it was common for them to break) or that the mounting points failed one-at-a-time until all were broken?
The levers are empty permitted rod already ok
 
1 - 20 of 20 Posts
Top