GL1800Riders Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
6,891 Posts
Looks good, Shooter!

I'd be careful about changing the reflector colors up front.

The usual standards are for Amber on the front half of the vehicle, Red to the rear.

Here's the appropriate wording from the WA state code:

RCW 46.37.100
Color of clearance lamps, side marker lamps, back-up lamps, and reflectors.
(1) Front clearance lamps and those marker lamps and reflectors mounted on the front or on the side near the front of a vehicle shall display or reflect an amber color.

(2) Rear clearance lamps and those marker lamps and reflectors mounted on the rear or on the sides near the rear of a vehicle shall display or reflect a red color.

(3) All lighting devices and reflectors mounted on the rear of any vehicle shall display or reflect a red color, except the stop lamp or other signal device, which may be red, amber, or yellow, and except that on any vehicle forty or more years old, or on any motorcycle regardless of age, the taillight may also contain a blue or purple insert of not more than one inch in diameter, and except that the light illuminating the license plate shall be white and the light emitted by a back-up lamp shall be white or amber.
I hope to have a new product available soon for a similar application.
 
1 - 1 of 1 Posts
Top