GL1800Riders Forums banner

1 - 2 of 2 Posts
S

·
Guest
Joined
·
0 Posts
Discussion Starter #1
Yes it can be done and it works! I am doing my ST1100 now but as it turns out the 175x60 will fit the GL1500 rim which is what I am using on the STealth11 for the conversion. What I have discovered is most of the drive components on these bigger bikes interchange. The drive coupling, brake rotors, calipers all interchange so switching rim size is not a problem. As with the ST conversion the rear wheel assembly may need to be shifted to the left a bit so the tire will clear the drive shaft tube.

Here is the ST scoop - http://www.stealth11.com/ctconversion.htm
 
S

·
Guest
Joined
·
0 Posts
Discussion Starter #2
Home made bead breakers

What is the hardest part of doing your own tire changes? Breaking the bead loose for sure.

Here is some info on a couple home make bead breakers that not only work but cost nothing to build. Sorry no brand names and some assembly required :cry:

http://www.wingtechtips.com/tirebb.htm
 
1 - 2 of 2 Posts
Top