GL1800Riders Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
1,004 Posts
Discussion Starter #1
I am going darkside soon and wanted to know if I can completely disable the OEM TPMS and the blinking lights from both dummy warnings?

Thanks
 

·
Registered
Joined
·
343 Posts
On previous thread I showed the way to disable,it is located under the right fairing pocket....The wheel sensors MUST be removed to make the light stop blinking after doing this..At least in my case thats what I had to do.
 

·
Registered
Joined
·
4,115 Posts
Check out my post in the "How to" forum.
http://gl1800riders.com/forums/showthread.php?t=273674

No need to remove wheel sensors doing it this way. By using various plugs, you can decide which TPMS indicators will illuminate. I currently just have mine totally disabled and use an aftermarket TPMS instead.

I am going darkside soon and wanted to know if I can completely disable the OEM TPMS and the blinking lights from both dummy warnings?

Thanks
 

·
Registered
Joined
·
4,115 Posts
On previous thread I showed the way to disable,it is located under the right fairing pocket....The wheel sensors MUST be removed to make the light stop blinking after doing this..At least in my case thats what I had to do.
That's because you only disabled 1 of the 2 indicators (if the diagram you posted is how you partially disabled your TPMS). If you ground out the other indicator (Bl/W), then you would not have to remove the wheel sensors.

Below is my schematic (I modified the TPMS schematic in the Honda Service Manual) of how to disable BOTH the TPMS indicators.

http://i34.photobucket.com/albums/d149/capozzir/2009%20Goldwing/Honda%20TPMS%20Mod/TPMSModWiringDiagram-1.jpg
 

·
Registered
Joined
·
19,260 Posts
Good luck. I hope it works out for you:thumbup:
 
1 - 6 of 6 Posts
Top