GL1800Riders Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
642 Posts
Discussion Starter #1
to connect the driver's 5-pin DIN socket into the bike's audio system? My guess is a 6-conductor hitachi, but I'm not willing to remove the top shelter to find out. The HDL fiche isn't detailed enough to make it out.

Actually I'd like to know about the passenger socket as well.

Anyone?

Thanks in advance.

EDIT: the passenger connects into the bike with a 3x2 6-conductor hitachi socket, the bike side is the plug. Not sure about the driver, but would guess the same.
 

·
Registered
Joined
·
2,518 Posts
The drivers connection is under the left fairing pocket, you can just follow the pigtail after the pocket is removed, be careful not to lose the push pins, all you do to remove the pocket is depress the center of the pins and remove them, replce them by pushing the center of the pin back up, place in the hole and push the center back dwon flush.

The passengers can be found by removeing the seat and follow the pigtail to its connector, they are both Hitachi connectors.
 
1 - 2 of 2 Posts
Top