GL1800Riders Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
173 Posts
Discussion Starter · #1 ·
I've heard 29, 30, 31 , 32 and 33.

Is this a good range on psi?

I realize the CT may not be a senitive with the pressure as the MT.

My payload stays close to max out on the 1800.

Recommended PSI??
 

·
Registered
Joined
·
2,554 Posts
30 pounds will give even wear for the life of the tire. However, considering the high miles achieved you can afford to go to 32 pounds. This will give slightly lighter steering characteristics, but will show a little more wear thru the center of the tire. Cheers..... :biker:
 

·
Registered
Joined
·
4,751 Posts
I put 19677 miles on my 3D at 29 psi it wore even all the way across. I still had 3/32 tread left just got into the steel cord up on the side lot of curves arount here:thumbup:
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top