Joined
·
73 Posts
I am ordering dyna beads for my 08 wing but I cant find the amonts to add to the front and rear tires. Caan anyone tell me the amounts the front and rear take each? :shrug: Thank you ..
Dyna Beads, amounts?
1 - 6 of 6 Posts
Joined
·
939 Posts
From what I have read use two ounces in each tire. Call Bulldog on this board. He will help you out.
www.shinhopples.com
www.shinhopples.com
Joined
·
233 Posts
Check here on their site, under " Motorcycle ".
http://innovativebalancing.com/chart.htm#MotorcycleChart
http://innovativebalancing.com/chart.htm#MotorcycleChart
Joined
·
3,025 Posts
Two ounces each. :agree:
Joined
·
7,040 Posts
Get them from the DAWG! You'll have them before you know it! I did! 2 oz. on M/C tires, 3 oz. for C/Tires.
1 - 6 of 6 Posts
Join the discussion
Recommended Reading
-
Valve Check
GL1800 Tech BoardThis post is asking what people think about the need to loosen the cam chain or leave it alone during valve clearance checks. I know this subject has been discussed but I was thinking of looking at it a bit differently that I am not sure anyone has talked about. Yes, some people say you need...- 8
- 173
-
DillTm · updated
-
F1 light comes on after 20 miles
GL1800 Tech BoardI just got back home from riding my 2002 Goldwing from Florida to Indiana 1200 miles. F1 light comes on after about 20 miles and stays on until I have to stop for gas. It was a job to keep bike running, riding up to gas stations. After filling the wing up the wing started right up and ran great...- 3
- 61
-
bluestreek-02 · updated
-
Starter spins but not engaging
GL1800 Tech BoardI have a 2005 GL1800 ABS the starter spins but does not engage, opened the front inspection cover, motor is not turning. This started just after an oil change. Anyone have any idea?- 13
- 288
-
Dr Crowther · updated
-
Nav system
GL1800 Tech BoardIs there anyone on the forum the know about the onboard Nav system, if so would you get in touch with me I'm looking for the latest copy of Honda firmware for the nav system (version 4.70 or higher)- 27
- 5K
-
fun42 · updated
-
F6B: Sticking Brakes
GL1800 Tech BoardAfter installing Progressive Monotubes in my 2013 F6B over the winter I decide to get the bike out today and test. I only rode 1/4 mile and after hitting the brakes could tell there was a problem. The front left and rear calipers seem to stay engaged after applying either front or rear brake...- 5
- 90
Join now to ask and comment!