GL1800Riders Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
246 Posts
Discussion Starter · #1 ·
I bought a used 1996 Escapade trailer somthing is weird with the bearins. I had to add spacers I bought from CSC which tighten up the wheel slop and took it for a 4,000 trip no problems but the tires wore really funny. I ran about 25 psi. Now I would like to just replace all of the bearings and put new tires on. Does anybody know exactly what parts and tools I should get and how hard it is going to be to do the work. Never done car or trailer bearings only many sets of motrorcycle wheel bearings. CSC seem a little confused when I ordered parts in the past for this trailer but they were very nice to deal with. I don't mind spending
money for good parts.

Thank you for any help!

Doug
 

·
Registered
Joined
·
246 Posts
Discussion Starter · #3 ·
Thank You!!

Thank you for pointing this out!!! Great info

Thanks

Doug
 

·
Registered
Joined
·
246 Posts
Discussion Starter · #5 ·
Hubs

My hubs are pretty rusted they look really old. So I think I'm going to just replaced the whole assembly. I see that northen tool sells the hub but people say the dust caps don't fit. Made in the USA does sound nice!

Thanks
Doug
 
1 - 3 of 3 Posts
Top