GL1800Riders Forums banner
  • Hey everyone! Enter your ride HERE to be a part of August's Ride of the Month Challenge!
1 - 11 of 11 Posts

·
Registered
Joined
·
1,056 Posts
Discussion Starter · #1 ·
Well now I have to replace the fog lights. One is burned out and I might as well do both just like I did with the low beams.
What is a good light to replace them with.
I used the PIA's in the low beams and would like to do the same with the fog lights.
But not sure if I can just replace the bulbs or the complete light.
 

·
Registered
Joined
·
552 Posts
Whatever you do, don't touch the bulbs with your fingers, especially if they are hot. It's best to use a clean hankerchief when handling new light bulbs so as not to leave any residual prints on the bulb itself. That way they will last longer and will not burn out so soon.
 

·
Registered
Joined
·
1,056 Posts
Discussion Starter · #8 ·
I did and all I could see was a part # on the bottom of the lens.
I have to take it apart anyways to replace it. Cold and rainy here for the next few days. Good thing I've been riding alot lately. :D
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top