I have an 02 wing with the Ring of Fire and Caliber covers. My question is that the lower front (front) fender bolt is missing. It is the lower one. I did not install the caliber covers and want to know if the bolt that is missing is the original or was a longer one used when the covers and ring of fire were added.
Front Fender bolt
1 - 5 of 5 Posts
Joined
·
11,396 Posts
Are you are talking about the two bolts that go "Through" the rotor cover?.
If so they come with the rotor cover kit.You'll need to contact the manufacture,or take one out and match it up at lowes/home depot/ACE hardware.
Bolt color would be the only issue.I'd shoot for Stainless Steel.
If you're talking about the Chrome top caliper cover?.Then you'll need to order #15 here. (Stock Bolts) http://www.hdlparts.com/fiche_secti...ry=MOTORCYCLES&make=HONDA&year=2002&fveh=3503
If so they come with the rotor cover kit.You'll need to contact the manufacture,or take one out and match it up at lowes/home depot/ACE hardware.
Bolt color would be the only issue.I'd shoot for Stainless Steel.
If you're talking about the Chrome top caliper cover?.Then you'll need to order #15 here. (Stock Bolts) http://www.hdlparts.com/fiche_secti...ry=MOTORCYCLES&make=HONDA&year=2002&fveh=3503
Joined
·
8,359 Posts
Don't forget to order #7 the rubber washer that goes behind the bolt head.
Joined
·
2,595 Posts
Rocky is right on the money with using Stainless Steel bolts. I use them whenever I replace stock bolts if possible or add accessories.:thumbup:
Corventure ave
Corventure ave
1 - 5 of 5 Posts
Join the discussion
