GL1800Riders Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
503 Posts
Frt lower Cowl

It is not hard at all you have 3 allen bolts and one pin per side and it will come loose. You will have to pull the black cover up a little to get it to come down. You didn't say if you have driving lights if you do you will have to clip the round insert off and file or cut smooth. Before you put the new one on you have to remove the two clips the the allen bolts go in and put it on the new one. The allen bolts are not the same size so be careful you replace as they come out. When you get the replacement there will be instructions with it. If you get chrome one think about the cam cover and cap. And if you do that put the cap on first before the cam cover. Also put the fender extender on to protect the frt of the engine.
 
1 - 1 of 1 Posts
Top