I changed my front fork seals last week and while I was in the forks, I changed to progressive springs. While I like the operation of the new springs, I feel they are a little stiff. I have a Trike Shop 4 degree rake, which comes with spacer bushings that go in below the springs to get clearance up front. I dropped them back in, and am thinking maybe they make it to stiff. They wouldn't be hard to remove, but I am unsure if it would cause a front ground clearance problem. The old springs were way to soft in my opinion, as they bottomed out often. If any of you have experience with this issue, let me hear about it. I'm all ears.