GL1800Riders Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
45 Posts
Have a 2001A. The grip heater switch (original - Honda equipment) is erratic. Mechanic looked at the switch and said he cannot get it open to do any work. As in - quasi sealed. I was willing to order a replacement switch but dealer said it was not possible to order the switch alone. Anyone have any suggestions for repair or replacement with Honda or off the shelf parts? And thanks for the help. FRISKY
I would be interested in your old non-functional switch as an experimental piece to see if there is some way to rework it. Let me know please.
 

·
Registered
Joined
·
45 Posts
The only choices seem to be:
1. Original Hondaline - expensive
2. New right hand plastic panel (PANEL, R. 83160-MCA-000 ~$14) plus heated grip kit from Big Bike parts, see http://www.directlineparts.com/product.asp?pid=4292&str=4
3. New right hand panel plus Heat Troller http://www.warmnsafe.com/motorcycle_handgrips.php?PHPSESSID=49a77086bee5c58f2cb119db1ab1e7d4
4. Heated grip kit from Electrical Connection, but note this is not a variable control and you WILL need a resistor with your grips if you use it http://www.directlineparts.com/product.asp?pid=6546&str=4
5. New right hand accessory panel with switches and digital voltmeter. Use a variable Heat Troller installed on the left side under the key lock? http://www.wingstuff.com/pgroup_detail/3523_GL1800_Accessory_Digital_Voltmeter_w_Acc_Switch
6. New right hand panel, leave blank, install HeatTroller elsewhere.
 
1 - 3 of 3 Posts
Top