GL1800Riders Forums banner
  • Hey everyone! Enter your ride HERE to be a part of MAY's Ride of the Month Challenge!

1 - 5 of 5 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter · #1 ·
I love my Wing!!!!
I don't like the way the controls are set. I attempted to move them to
a more user friendly angle but the would not move. What did I miss???
 

·
Registered
Joined
·
300 Posts
controlls

they are usually pinned to a certian position as in the body of the swithcgear has a pin that protrudes into the bar stopping it from twisting .they do this so the wiring wont get sheared off by the [ possible ] constant movment around the bar... hope this helps jake
 
G

·
guages

I feel the same way ,if you are tall its hard to see some of the letters. I was thinking of grinding off the pin and twisting the pods up some. any one every done this?
 

·
Registered
Joined
·
173 Posts
You could do that, I guess, but if you do then drill another key hole into the bar to secure the new position. Haven't done it; just know you'll be sorry if you move them and they start twisting around on you later.
 

·
Registered
Joined
·
300 Posts
pininng controls

i like the idea of just making another hole for the pin other than removing it for sure that would be the way i woould do it .
 
1 - 5 of 5 Posts
Top