GL1800Riders Forums banner
1 - 3 of 3 Posts

· Registered
Joined
·
270 Posts
From the top, reach down into the tunnel and remove the rubber boot. Then just turn out the bulb socket and remove the bulb. Put the new bulb (H7), into the bulb socket and turn it back in. Replace the rubber boot and your done in 10-15 min including cleanup.

This only works for the low beam which are the most frequent bulb replacements.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top