[HoseChief]

Inherited 2 half-helmet Audio Half Helmet Music and Communications Headsets. Pictured above. 7 pin connectors.

Does anyone know of a cord that would allow me to use on a Goldwing?

 

[wazted]

Looks like an IMC but thats just a guess. If so, then you should be able to get one from them.

http://imcmoto.com/honda-goldwing-headsets/5-pin-half-helmet-helmetless-headset.html

 

[jeffswinginit]

Don't mean to Hijack the thread, but. Does anyone know if there is a cable available. To adapt my HD headset's to my GW? I haven't been able to find one. Thank's.

 

[Gray Wolf]

HoseChief, I agree with Wazted it looks like IMC. I think Whitehorse Gear sells the cord for about $30.

 

[ronbien]

Don't mean to Hijack the thread, but. Does anyone know if there is a cable available. To adapt my HD headset's to my GW? I haven't been able to find one. Thank's.

Ed from Edsets has several adapters but you will have to know the pinouts so you can get the correct one. He does not list them by bikes.
You will need a 6 pin to 5 pin, I think, but the pinouts are important.
http://www.edsets.com/edsets_adapters

Good Luck!

PS. Ed it out until the 12th according to his site.

 

[jeffswinginit]

Ed from Edsets has several adapters but you will have to know the pinouts so you can get the correct one. He does not list them by bikes.
You will need a 6 pin to 5 pin, I think, but the pinouts are important.
http://www.edsets.com/edsets_adapters

Good Luck!

PS. Ed it out until the 12th according to his site.

Thank you sir, that's a big help!

 

[HoseChief]

Thanks for the information. Placing order today.

Greg

 

[Whiskers]

cord

if you have a J&M headsets
call J&M they will have lower cords that wikk help you switch