GL1800Riders Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
365 Posts
Discussion Starter #1
Hello.I replaced my air cleaner,and while putting on the top shelter,felt the adjuster for the ffoot vent heater go slack.Finished the shelter installation,and puled off the botton cover on the front of the motor,and the heater vent cable had pulled apart completely.
The cable from the actual vents ,come together to form one plug ,and the cable from the dash,connects to it....but.when I plug them together....nothing,any ideas?Trying to figure out how tosend pics as I write this.Tahnks for the help[/url]
 

·
Registered
Joined
·
589 Posts
Check in behind the left glove box. You will need to remove it. Mine wouldn't close properly shortly after I bought the bike and that's where the mechanic went to reset the cable and its clamp.
 

·
Registered
Joined
·
365 Posts
Discussion Starter #3
Hello Mike,this cable came apart down at the front of the motor ,where the cables for the vent meet.
 
1 - 3 of 3 Posts
Top