GL1800Riders Forums banner

1 - 4 of 4 Posts

·
I U Turn
Joined
·
888 Posts
Discussion Starter #1
Jon, I am planning on geting a 2610 in a couple of mounths. Is there a way to hook it up so it will mute the Honda stereo and itercom when it gives a direction? I know I could hook it up through the aux plug and have that feature. But I want to be able to listen to my Honda cd player.
Thanks for your help in advance.
Mick :yw1:
 

·
Registered
Joined
·
221 Posts
From an email I got from Kennedy today.
http://www.cellset.com/Motorcycleitems.html


The harness for the 2610 is done. The following options are available
to you.

1. If you already own a Kennedy Technology CellSet MC/SP or MC/SP2,
RadarSet, old style DualSet (with hardwired 2.5 mm mono plugs),
GPS/MPGSet or GPSet-SP3, contact Cyclegadgets.com and order the Garmin
cable harness with the 2.5 mm jack molded into the cable harness.
GPSet owners merely cap and tie back the SP3 power plug.

I do not know the MSRP for this harness. Check with Cyclegadgets.

If you do not own one of these products, contact CycelGadgets and order
the SingleSet or DualSet with appropriate intercom harness, device
harness(es) and power harness(es). The 1800US power harness connects
the device harness to a switched supply, the 1800-Euro harness is not
terminated with a hitachi type plug so you can connect it to an
unswitched source.

A note about power harnesses and device harnesses.

If you want to connect two devices and want one to have switched power
(e.g. radar detector) and the 2610 to be unswitched, buy one 1800US
Power harness and one 1800Euro harness. Connect the 1800US power
harness directly to the radar detector's device harness. Similarly,
attach the 1800Euro power harness directly to the 2610 device harness.

If you want both devices to be switched, just purchase one 1800US power
harness (1800Euro for unswitched) and connect it to the DualSet.
DualSet splits the power harness and feeds it to each device harness.

MSRP for the Single Set with 2610 device harness is $99.95
MSRP for the DualSet with 2610 harness and radar detector harness is
$149.95. Add $10 for additional power harness


Thanks for being so patient.

Jon
 

·
Registered
Joined
·
6,891 Posts
Hi Mick,

I'm not sure which "Jon" you were asking, but I'll chip in here anyway.

If you feed the audio output of the GPS through one of the Kennedy products, you'll get the audio to break in over the intercom, just like when you start talking over the intercom.
  • SingleSet: Connects one audio source (radar detector or GPS) into the intercom system
    DualSet: Connects two audio sources (RD & GPS) into the intercom system
    GPSset: Provides power and audio for the SPIII (still waiting on connectors and cables to make one for the 2610)
All of these should do what you want to do - the GPS will come over the intercom when it starts speaking, muting your other audio sources. If you ride alone alot (when you'd be using the GPS), you might want to consider using the MPGset - this switches the audio input to the AUX connector when the GPS speaks. With this setup, you don't have to run with the intercom on (unless you want it) and dealing with all the background noise.

When the GPS speaks, it's going to mute the AUX input either way.

I hope this helps - I should have some of these parts on hand next week if you want to see how they all hook together.
 

·
I U Turn
Joined
·
888 Posts
Discussion Starter #4
I did'nt know there was another Jon. Your the one. :D
Mick :yw1:
 
1 - 4 of 4 Posts
Top