GL1800Riders Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
168 Posts
Discussion Starter #1
My bike is an 05. I have everything done but connecting the relay trigger wire which is the Blue wire to the fuse panel. The instructions are not clear as to where this wire is supposed to connect. Anyone here have a similar model and had success inconnecting the EC PowerPlate? My Accessory terminal does not have a place to connect as per instructions.
Help
Allan
 

·
Registered
Joined
·
687 Posts
I have an 04, so the bikes may not be exactly alike. But, I have to believe that you have a fuse panel on the bike and that there are two screws that are the terminals your looking for. One is hot, and the other ground. Take a look at the cover of the fuse holder and see where it says accessories. It should be a 5 amp fuse for that circuit. The screw is what you have to connect too. However, I connected to the relay so that all power would be used to start the bike, not keep the assessories lit.
 
1 - 2 of 2 Posts
Top