GL1800Riders Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
545 Posts
Discussion Starter #1
My key won't turn to ignition when I want to start the bike. It's a 2005 Goldwing trike. This problem just popped up. The key turns to the other positions. I squirted a recommended lubricant, but no luck. Any other suggestions. If not, can the ignition switch be removed and changed without taking off the entire shelter?
 

·
Registered
Joined
·
2,795 Posts
Clarification please... "won't turn to ignition, but turns to other positions?" If you are turning to "ACC" position, that is past the run position. Will it turn past run to ACC?
 

·
Registered
Joined
·
259 Posts
Is the switch in the "Fork Lock" position? You may need to move the bars to release pressure for the switch to unlock.
 

·
Registered
Joined
·
1,050 Posts
Ignoring the lock position, it will go from Off to On to ACC. "Ignition" is just a label on the ring so you know this is the Ignition switch.


To start the bike, the key must be in the "On" position.
 

·
Registered
Joined
·
545 Posts
Discussion Starter #7
Ignoring the lock position, it will go from Off to On to ACC. "Ignition" is just a label on the ring so you know this is the Ignition switch.


To start the bike, the key must be in the "On" position.

That works...Many thanks to you and all those who replied.
 
1 - 7 of 7 Posts
Top