GL1800Riders Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
95 Posts
Discussion Starter #1
Hey guys I’m looking at a 09 with CSC cobra kit I was told to be careful because of problems with drive line on that model Any input would be appreciated weather that’s true or not? Thanks, Jim...
 

·
Registered
Joined
·
101 Posts
Hey guys I’m looking at a 09 with CSC cobra kit I was told to be careful because of problems with drive line on that model Any input would be appreciated weather that’s true or not? Thanks, Jim...
The latest version of the CSC driveshaft started in 2012. It is an automobile style driveshaft with u-joints that is virtually bullet proof.

The gear box and Honda driveshaft with rubber isolator was used from 2007 to 2011 and there were driveshaft problems with conversions done in these years.



Do know the year that conversion was actually done on the 09 Goldwing?

If converted after 2011 you should be ok - see if you can get a look at the driveshaft, if it has u-joints it is the newer style - here's a photo
 
1 - 3 of 3 Posts
Top