GL1800Riders Forums banner

1 - 13 of 13 Posts
R

·
Guest
Joined
·
0 Posts
Discussion Starter #1
Pirelli tire is on with Dyna Beads and a 17 mile test drive done. Boy was that a super tight fit putting it back on the wing. :eek: Finally got smart and put the bike in neutral so the hub could rotate then it slipped on in. Test ride went fine. Tire pressure is at 31 and may be to much. I'll experiment with the pressure. The only thing that didn't go well was the new valve stem. It faces off to the right now (did not have to cut off the T on the wheel) but it's hard to get to with the standard air chuck I have. I'll be looking for another style chuck to fix that problem. All in all things went well with the test drive and I took her up to 80 mph with no problems.

I'll be requesting that DarkSider number now. I feel so evil. :twisted:

 

·
Registered
Joined
·
2,918 Posts
Welcome to the DARKSIDE....... :flg:
Don't forget to get your # an Decal....




 

·
Smoky
Joined
·
1,191 Posts
Rider Steve,
That's one fine lookin piece of rubber you got there :yes1: !
Welcome to the enlightened "DARKSIDE" :biggrin: ! Be prepared because the fun has but begun :wink: !
 
1 - 13 of 13 Posts
Top