GL1800Riders Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter #1
I just took a day trip (pulling a trailer) and all is well.....almost. After disconnecting the trailer I noticed that the left signal indicator on the dash was on with no flash. I verified that the front/rear lights were on high filament. I tried everything to get it back to normal but couldn't. It is like they are in the middle of a blink and got stuck. Signal switch makes no difference.

What should I do?
 

·
Vendor
Joined
·
17,787 Posts
I know this is a really stupid question, but make, model, and year is most always helpful.
 
  • Like
Reactions: Augi

·
GL1800 Doctor
Joined
·
20,370 Posts
I just took a day trip (pulling a trailer) and all is well.....almost. After disconnecting the trailer I noticed that the left signal indicator on the dash was on with no flash. I verified that the front/rear lights were on high filament. I tried everything to get it back to normal but couldn't. It is like they are in the middle of a blink and got stuck. Signal switch makes no difference.

What should I do?
What do you get if you turn on the hazards? Do you have a converter and/or isolator for the trailer?
 
1 - 3 of 3 Posts
Top