GL1800Riders Forums banner
  • Hey everyone! Enter your ride HERE to be a part of August's Ride of the Month Challenge!
1 - 5 of 5 Posts

·
Registered
Joined
·
68 Posts
Discussion Starter · #1 ·
Started for work this morning ,every thing fine,went a couple of blocks,switched my high beams on and the headlights went out.
switched back to low beam,nothing,went a couple of blocks and the low beams came back on.
I rode about 10 miles tried the high beams again and the lights went out again,so i switched back to low and now neither will work.
Any ideas on where to start looking for the problem,hopefully just the switch. thanks
 

·
Registered
Joined
·
11,183 Posts
Terry, this may sound a little far fetched but when that exact thing happened to me, it was the starter push button switch. I sprayed it with contact cleaner/lubricant and the problem went away. I am sure it is only a matter of time until it returns.
 

·
Registered
Joined
·
7,618 Posts
Try looking here by clickin on the picture:
:fullsize:
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top