[Don Saenz '01 Pearl Blue]

The mic mutes installation sheet says to locate a red 6 pin connector/plug under my seat. I have neither a red connector or 6 pin connector in either of the 2 bundles under the seat. I also do not have a CB installed.
Any help would be appreciated

Thanks
Don Saenz

 

[Morph]

Mic-Mutes installation

Don,

I left you a phone message.

The 6 pin connector that you are looking for is inside of the boot on an 1800, see instructions 2 and 3 A.

Start at the passenger's helmet headset plug following that cable under the seat, it goes inside the rubber boot and becomes the 6 pin connector that you are looking for. You will be separating that connector to install the adapter for the passenger's headset.

Feel free to call me if you like 888-464-8564

 

[Morph]

Don,

This may help.

http://www.wingtechtips.com/1800epss/ep ... pro137.htm