GL1800Riders Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
19,385 Posts
Discussion Starter #1
I use the MOP Model D and like them alright. I was thinking about putting a highway peg also on the verticle crash bar. Has anyone done this? If so can you post pictures and state model numbers.
 

·
Registered
Joined
·
439 Posts
I'm not sure but I think ddking has a picture of that on his getting comfortable site . Find one of his post the link is at the bottom .
 

·
Registered
Joined
·
1,729 Posts
I thought Jim had a picture on his website but it was 2 Mic O Pegs mounted. I have seen them put there you can get the mount at any store because it is a 1" clamp mount and then whichever peg you like. You can also use the Ergo mounts http://www.hondadirectlineusa.com/store ... =714135331 Then they could be let down and closer to you.
 

·
Registered
Joined
·
4,613 Posts
Here is a picture of MOP model D with Kury 4050 mounts and Iso Mini Wings. The 4050 mount will accept any Kury peg. You can use any MOP model that mounts on the horizontal bar. I think some have been able to mount 4056s on the vertical, but if I remember correctly, you have to modify the mount.

 
1 - 4 of 4 Posts
Top