GL1800Riders Forums banner

1 - 9 of 9 Posts

·
Registered
Joined
·
149 Posts
Discussion Starter #1
Except for the aux cord, is anything needed to mount a Zumo on a Wing, or is everything included in the box? And, how does it mount? (two bolts by a master cyl?, U-bolt around a handle bar, etc)?

Thanks in advance
Mack
 

·
Registered
Joined
·
6,891 Posts
It comes with the single-ball RAM base to attach it to your reservoir clamp bolts as well as a U-Bolt assembly (that won't work too well on the GW bars).

The necessary RAM parts are included right in the box, you won't need anything else.



Wire the included power cord to a power source and connect the audio jack to the AUX input and you're good to go.
 

·
Registered
Joined
·
6,891 Posts
Yes, my dash mount will work for the Zumo - you would typically want to use an extension plate to raise it up since they put the mounting holes at the top of the cradle (which forces the GPS to block down to about the 40MPH level).



This is a side view without the plate installed
 

·
Registered
Joined
·
5,844 Posts
1 - 9 of 9 Posts
Top