GL1800Riders Forums banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Ride of the Month Challenge!

1 - 7 of 7 Posts

·
Registered
Joined
·
106 Posts
Discussion Starter #1
:oops:

Well actually I need a screw size.
I broke one of my my Tulsa mirror wings and can't find the old screws
that I removed when I put the wings on. I checked the different part
fische boards and they don't show that screw as a seperate part so, no
description as to size.

Size, length and thread would be great.

Thanks

Jay
 

·
Registered
Joined
·
4,246 Posts
It's a Phillips 5mm screw about 12mm long. The thread would be the same as the longer screws that held on the Tulsa mirror wings. Maybe 1.2? ... just a guess.

Use blue Loctite when mounting.
 

·
Registered
Joined
·
221 Posts
Be very carefully about getting any Loctite on plastic parts as it will cause them to craze.

:yw1:
 

·
Registered
Joined
·
4,246 Posts
Gladiator said:
I believe on a 5mm screw or bolt the pitch is either .8 or .9. There are two pitchs for that diameter screw- bolt
I counted about 14 or 15 threads (approx.) in 12mm. That's what I based my guess on.

Anyway, all he has to do is match the thread on the Tulsa bolts he still has. :D
 

·
Registered
Joined
·
69 Posts
Jay, I just put on the Baker hand wings and still have the Screws to the mirriors and they are 5X0.8X aprox 1/2" long. I hope this helps.

Al
 
1 - 7 of 7 Posts
Top