GL1800Riders Forums banner
1 - 12 of 12 Posts

·
Registered
Joined
·
9,099 Posts
Reminds me of the two state workers, one digging holes, the other following and filling them up. Asked why they were doing that, they said, 'Well, there were three of us, but they laid off Bubba, who put the shrubs in the holes."
 

·
Registered
Joined
·
132 Posts
Dave said:
Fake picture. A striping macheine couldn't do that.
Dave
here in Alabama these guys will find a way to make the striping machine do that before they would stop and move the tree. :D
 

·
Registered
Joined
·
399 Posts
Tigger I agree our stripe crew would just shut the machine off then start it again on the other side. That picture has temporary striping tape you can see the over lap and the edges don't match. I don't want my stripers to stop and move the branch I want my maintenance crew to go ahead of them and remove obstacles. The problem is they don't always tell me when they are going to be in my area.
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top