GL1800Riders Forums banner
  • Hey everyone! Enter your ride HERE to be a part of MAY's Ride of the Month Challenge!

1 - 4 of 4 Posts

·
Registered
Joined
·
1,410 Posts
Discussion Starter · #1 ·
I'm going to build a PTT switch for the co-rider. Can someone tell me or show me exactly where it connects under the seat, and which bundle/boot and what color wires I'm looking for? Thanks.
 
G

·
You will find a 2-pin black connector in a weather boot under the seat near the relay box right next to where the passenger's headset plugs in. The connector has a yellow wire and a green wire. All you need to do for a PTT switch is wire a momentary switch so that those two wires are connected when the switch is pressed and disconnected when released. (That plug is provided for the optional Hondaline passenger controller.)
 

·
Registered
Joined
·
1,410 Posts
Discussion Starter · #4 ·
WhiteBird00, that is exactly what I had in mind. Thank you very much.
 
1 - 4 of 4 Posts
Top