GL1800Riders Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
1,189 Posts
Discussion Starter #1
I pulled the bike apart (seat, top shelter, meter panel and front fairing) to replace the air filter , all the front headlights and added a few more LEDs and mic-mutes.

When I put the front fairing back on, everything seems to work right (high and low beam headlights) but the turn signals work but blink noticeably faster.

Any ideas what I forgot to do?

BTW - The top shelter, meter panel and seat is not back on yet.

Appreciate the advice
 

·
Registered
Joined
·
762 Posts
Usually that means that one of your turn signal bulbs is blown. Check to see that they're all working. Or, perhaps you replaced one or more with led lights? LED's have less resistance than regular bulbs and cause the flasher to increase in frequency.
 

·
Registered
Joined
·
1,189 Posts
Discussion Starter #3
Could it be that the mirrors are not attached yet??

The LEDS are strictly for show around the radiator grill.
 

·
Registered
Joined
·
1,189 Posts
Discussion Starter #5
That makes sense that there's no resistance since the mirrors are not hooked up. Shoulda already thought of that.

Thanks for the advice.
 
1 - 5 of 5 Posts
Top