GL1800Riders Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
36 Posts
Discussion Starter · #1 ·
Of my '07 GL1800. There is a OEM cover which loops below the front of the engine and has cutouts for fog lights on either side. Not sure what it's called. I've been noticing a rattle when I go over rough pavement, and finally traced it to this cover or shroud:wrong:. It is flexing and hitting something behind it. All the bolts are tight.

Is this a common problem and is there an easy fix:?:?

Thanks
 

·
Registered
Joined
·
36 Posts
Discussion Starter · #4 ·
Thanks

Thanks for the advice. I'll tear into it tomorrow and post the results.
 

·
Registered
Joined
·
36 Posts
Discussion Starter · #9 ·
Found IT!

Got under the bike and was ready to pull the cowl, but first tried flexing it with my hand. It squeaks, and if you thump it, it rattles against the lower engine cover where they lap - not near the bolts, but in at the center bottom, where there is no fastener. I don't think I can adjust this out, so may have to live with it:frown:.

At least there were no loose parts or missing bolts.

Thanks for all the good suggestions:thumbup:!
 
1 - 3 of 3 Posts
Top