[galewing]

Board, Does the engine have to be removed from the chassis to remove
the rear crankcase cover? Please read my resent posts. Thank you. galewing

 

[goldwingrider.steve]

It sure does, unfortunately.

 

[galewing]

Steve,Thank You. galewing

 

[goldwingrider.steve]

Do you still need the part number for the alternator drive gear?

 

[goldwingrider.steve]

I found the number you need, on the Direct Line site it's on the fiche for the primary drive gear, number 2 on the drawing, Gear Assembly #13430-MCA-780

Hope this helps.

 

[galewing]

Steve, Yes I do. And all other gaskets, O rings, etc that may be required.
Thank for your reply. galewing
PS: Under what heading is the alt. drive found? galewing

 

[goldwingrider.steve]

Try

http://www.hdlparts.com/fiche_section_detail.asp

It is shown as Drive Gear, number 2 on the drawing.

Go to

http://www.hdlparts.com/fiche_section_d ... &fveh=3499

then in the drop down list select Rear Case for the rear crankcase cover and related gaskets etc.
You will also need a clutch cover gasket which is on the fiche for the Clutch Cover.

 

[galewing]

Steve, I found it. (primary drive gear) And I thought I looked at every
heading?
Thank you,Steve. And thank you to our sponser,Honda Direct Line.
To all a MERRY CHRISTMAS and a happy new year. galewing