GL1800Riders Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1,101 Posts
Discussion Starter #1 (Edited)
I need to tap into the rear running light wire on a 2016. Anyone know where to find it (I don’t have a 2016 manual).

Thanks

Does anyone know if Rob the doctor is on the board now

Sent from my iPad using Tapatalk
 

·
Registered
Joined
·
1,450 Posts
You can gain access to it under the seat at the C31 connector, it is a grey 14 pin normally found on the right side.
The tail light is in location 2 and is a brown wire with white stripe.

I almost never tap directly into wires on the bike, I normally build a break out jumper that plugs in between the connectors and bring a tag wire out from the jumper, in fact I have exactly that offered for sale on the Inventor's tool box here on the forum. Check it out here, https://gl1800riders.com/forums/201-inventors-hobby-shop/431273-c31-breakout-harness.html
 
  • Like
Reactions: Redgecko

·
Registered
Joined
·
1,101 Posts
Discussion Starter #3
You can gain access to it under the seat at the C31 connector, it is a grey 14 pin normally found on the right side.
The tail light is in location 2 and is a brown wire with white stripe.

I almost never tap directly into wires on the bike, I normally build a break out jumper that plugs in between the connectors and bring a tag wire out from the jumper, in fact I have exactly that offered for sale on the Inventor's tool box here on the forum. Check it out here, https://gl1800riders.com/forums/201-inventors-hobby-shop/431273-c31-breakout-harness.html

Thanks for your help
 
1 - 3 of 3 Posts
Top