GL1800Riders Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter #1
I have a 2002 Wing and I have a guestion I hope someone has an answer for. When I use the remote to lock or unlock the bikes trunk and saddlebags the front and rear turning signals show no indication of the command. They still lock properly, but the lights don't blink indicating their properly locked or unlocked. The turning signals work like normal under driving conditions, they just don't work when locking or unlocking the trunk/saddlebags. I have 162,000 miles on the bike and this just started happening about 1,000 miles ago. Any suggestions?
 

·
Registered
Joined
·
504 Posts
Sounds like either you have a defective turn signal flash output from the trunk lock control unit (located inside the trunk lid - pink/white wire) or you have a defective or unplugged turn signal diode assembly located under the seat. Another possibility is the pink/white wire has broken at the hinge of the trunk lid where the wires flex.
 
1 - 2 of 2 Posts
Top